background image

 
 
 
 

 

DC INTERNATIONAL INC. 

75 De Vaudreuil, Boucherville, Quebec, CANADA J4B 1K7 
Phone: (450) 449-6400                                    Fax: (450) 449-4679 
Web site: www.dc-inter.com       Email: [email protected] 

1.  Level ground to ensure appropriate drainage away from the building.  

A sand bed has to be put in place before the construction of the 
foundation. The concrete slab should be 4 inches (10 cm) thick and 
must be free of bumps and completely level.   

2.  Assemble the interior profiles on ground, one side at a time. The 

profiles slide easily one into the other.  Attach them together with 
aluminum angles to the base and the top of each wall.  Integrate the 
door and window frames into the front side. 
 

3.  Erect the four walls on the top of the concrete slab and attach the 

aluminum angles together. 
 

 

4.  On the outside of the shelter, put in place the reinforcing steel bars 

according to the structural drawing. To complete the framework, install 
the flat profiles.   
 

5.  The walls are ready to receive the concrete with a pump or directly with 

a bucket. 
 

6.  Install a top plate on the upper side of the wall. Pass the reinforcing 

steel bars through the top plate and bend them in the roof. A concrete 
mortar or grout must assure proper level and sturdy support of the top 
plate.  
 
 

 

7.  Place a ridge beam in the center of the roof and two secondary 

beams at each side to support the roof profiles.  

 
8.  Screw the roof profiles to the ridge steel beam and to the wall top 

plate.  

 
9.  Integrate the reinforcing steel bars into the roof profiles and attach 

them to the bent bars coming from the walls to make a monolithic 
concrete building.  

 
 

 

10.  To support the concrete, attach a wall plate to the roof profiles at the 

lower side of the roof. The concrete will be poured with a bucket into 
the profiles, four sections at a time. Immediately after, slide  
the flat profiles in place, also four at a time. 

 
11. Install an aluminum ridge capping on the top of the roof. 
 
12. Put the door and window in place and adjust them. 
 
13. Clean the surface by using water and a brush. 

D

D

C

C

 

 

S

S

H

H

E

E

L

L

T

T

E

E

R

R

 

 

A

A

S

S

S

S

E

E

M

M

B

B

L

L

Y

Y

 

 

KEY WEST 

Отзывы: