DC-Connex DCX-313, Быстрый старт

Страница: 10 / 16

OPERATION
10
The versatile Translation Tour system can be programmed to accommodate several
different use case scenarios by changing the CH and ID settings in the L1, L2 and G
units according to the following guidelines.
Change SETTING preferences for Channel number, ID (L1), Side Tone Level or
Microphone gain (L1, L2) when in SETTING mode by following the below method:
L1 & L2 have the ability to change Sx (Sidetone) and Cx (Microphone gain).
1.
2.
3.
4.
5.
Enter SETTING mode. will be flashing in the display along with the current
channel number. This is the Channel setting option.
Press the Up and Down buttons to change the Channel number.
Press the MODE button to move to the next SETTING option.
Press the Up/Down buttons to select preferred number in each setting option.
Exit SETTING mode by long pressing Up/Down buttons at the same time.
ACCESS SETTING MODE
CHANGE SETTINGS
Enter SETTING mode
Exit SETTING mode
by long pressing the Up and Down buttons at the same
time. by long pressing the Up/Down buttons at the same time until
main display is visible.
Refer to
the User’s manual on dc-connexsolutions.com/support for more detail.