DC Athletics Trail Blazer I, Руководство пользователя

Страница: 14 / 27

- 13 -
used to set the correlation, you can press
to
start the treadmill after finishing
setting.
2.3. Start key
“START” for startup, press SRATR the treadmill will run at minimal speed
2.4. Stop key
“STOP” for stop, the treadmill will stop when the key pressed.
2.5.
、
Speed +/-
Extra key for speed: standby status to adjust the set value. After starting, the
adjustment speed is adjusted, and the adjustment range is 0.1km/time, and it will
continue to increase or decrease automatically when it lasts for more than 0.5
seconds.
2.6.
、
/-
“” and “INCLINE-” are for slop adjusting, which can be used for the data
setting; when the treadmill is in use, the key can be used to adjust the slop, advance
1level per press; continuously press over 0.5s, it will continuously incline or decline.
2.7.
， ， ，
SPEED shortcut
3km/h, 6km/h, 9km/h, 12km/h can be set under operation condition.
2.8.
， ， ，
INCLINE SHORTCUT
3%, 6%, 9% & 12% can be set under operation condition
2.9. Kilometer transform with mile
Take off the safety key, press PROGRAM and MODE for three seconds at the same
time.
2.10. USB play control key
Play/pause,
Volume reduction (long press)/previous song(short press), Volume +
(long press)/next song(short press)
2.11. Refueling reminder function
The buzzer rings five times, the fill cue icon will light up per 300KM. Ready
mode, long press stop key, you can cancel the reminder.
3.Quick start( manual mode)
3.1. Turn on the power switch, attach the safety key to the safe lock position below the
panel.
3.2. Press
start key, the system enters a 3-second countdown, the buzzer sounds,
the speed window shows the countdown, and the treadmill starts running at 1km/h after
the countdown of 3 seconds.
3.3. The speed of the running machine can be adjusted, with
to add the speed,
to decrease the speed. Using to increase and to decrease the incline of the
treadmill.