DBZ DMi 2/2000A, Руководство пользователя, Страница: 8 / 20

Front Panel Introduction
1.Mounting Hole
Used for fixing amplifiers on cabinets, easy to transport
.
2.Handle
Used for handling product.
3.Air slot
The fan draws air from the front and exits it from the back. Do not block the intake and
exhaust ports.
Remarks: When the power is initially turned on, the fan will have an accelerated start-up sequence,
and the fan speed will automatically adjust to the normal low speed state.
4.Volume Knob
4
.
1 CH1 Volume Knob
Input signal attenuator, in stereo and parallel mode, they control the volume of the corresponding
channel; when bridged, CH1 will control the volume of the two channels CH1 and CH2.
4
.
2 CH2 Volume Knob
Input signal attenuator, in stereo and parallel mode, they control the volume of the corresponding
channel; when bridged, CH2 volume knob is idle and not controlled.
4
.
3 CH3 Volume Knob
Input signal attenuator, in stereo and parallel mode, they control the volume of the corresponding
channel; when bridged, CH3 will control the volume of the two channels, CH3 and CH4.
4
.
4 CH4 Volume Knob
Input signal attenuator, in stereo and parallel mode, they control the volume of the corresponding
channel; when bridged, CH4 volume knob is idle and not controlled.
5.Function LED lights
5.1 CLIP Level LED light
A red indicator will light when the amplitude of the output signal of the corresponding channel
(above the nominal power) has shaved off and is more than 1% distorted.
5
.
2 Signal Level LED light
SIG Signal Output Power Level LED indicator.
5
.
3 ON
—
Power LED light
Indicates that the amplifier is turned on and is in the working state.
6.LCD Screen Introduction
6.1 Voltage Display, from 150V to 270V.
6.2 Temperature Display, from 0
℃
to 100
℃
.
7.Power Switch
Press the switch up to “ON ”and down to “OFF”. When the switch is turned on, the amplifier is powered on.
6
4
3
5
7
1
6
2
5