dbx TR1616, Руководство пользователя, Страница: 26 / 32

TR1616
Owner’s Manual
20
TR1616 Preamp Setup
1�
Start with all
<MIC GAINS>
set to the full counterclockwise position and all front
panel buttons disengaged (LEDs off).
2�
Connect each instrument/source to the TR1616 using either the 1/4” input or XLR
input for each channel.
3�
Engage the
<+48>
buttons on any channels which require phantom power, such as
active direct boxes and condenser microphones.
Note:
All devices connected to the TR1616 which require phantom power must be
connected using the XLR connections.
4�
Engage the
<POLARITY>
buttons on any channels which require it, such as the bottom
microphone of a top/bottom dual mic’ed snare pair.
5�
With source signal present, adjust the first channel’s
<MIC GAIN>
knob so that the -10
dBFS LED barely lights and the CLIP LED does not.
6�
Repeat step 5 for each channel. If a source causes one of the TR1616’s inputs to clip
when the
<MIC GAIN>
knob is all the way down, engage the
<20dB PAD>
button for
the channel and then complete step 5.