ZC-1
- The ZC-1 is a programmable zone controller that allows input or output volume level
control from a wall panel.
ZC-2
- The ZC-2 is a programmable zone controller that allows input or output volume level and
mute control from a wall panel.
ZC-3
- The ZC-3 allows wall panel routing and Actions selection for the SC devices.
ZC-4
- The ZC-4 provides contact closure routing and Actions selection for room combining or
fire safety applications.
ZC-Fire
- The ZC-Fire is the interface to generic fire alarm relays. When fire alarm activates, the
general purpose relay can typically be programmed to close if normally open or vices-versa. The
ZC-fire interface unit monitors the state of the relay (n.o. or n.c.) and upon the state of change,
notifies the SC 32/64, which then mutes its outputs.
ZC-6
- The ZC-6 is a push-button up and down input or output volume controller.
ZC-7
- The ZC-7 allows Actions selection for the SC devices.
ZC-8
- The ZC-8 is used for a combination of input or output volume up/down, and four position
source/program select.
ZC-9
- The ZC-9 allows wall panel routing and Actions selection for the SC devices.
ZC-BOB
- The ZC-BOB allows parallel or home run cabling of the Zone Controllers.
Section 3
Wiring
11
®
SC 32 / SC 64
