Getting Started
®
1074 User Manual
2
Section 1
1074
IEC Power Cord Receptacle
This is the power cord receptacle of the 1074. An IEC cord is included with the shipped prod-
uct.
Power Switch
Turns the 1074 on and off.
Output Connectors
The output section of the 1074 offers electronically balanced XLR connections.
Operating Level Switch
The operating output level allows you to select between 4dBu or -10dBv output level.
Key Input Jack
The 1/4” TRS jack, will allow you to add a source signal directly into the gating path of the
1074, which is used to trigger the gating effect.
Input Connectors
The input section of the 1074 offers electronically balanced XLR connections.
Note:
The following controls are available either independently for all
four channels of the 1074, with the exception of the STEREO
COUPLE button.
Filter Control - 80Hz to 8kHz
The filter control allows the user to select the frequency at which
gating occurs. Frequency ranges from 80Hz to 8kHz.
Filter - On/Off
Pressing the Filter button will engage the filter.
Key Input - On/Off
Pressing the Key button will engage the inserted Key input source
signal.
1.2 Front Panel Controls
300
1.1 Rear Panel Connections
