www.dbtechnologies.com
info@dbtechnologies
‐
aeb.com
DVA
MINI
G2
4
Rev
1.0
cod.
420120326Q
III) DRK-M5 features and main accessories
For an easy setup are available among others: a
professional fly-bar (
DRK-M5
) for flown installation, a
cart (
DT-8-MINI
) for a quick and safe transport, a rain
cover, and accessories specifically designed for stacked
mounting. Please note that DVA MINI G2 can also be
directly mounted in line array configuration under the
DVA MS12 subwoofer (see the related complete
manual for further information).
The
DRK-M5
fly-bar is an example of the same 3 points
rigging system strategy.
As shown in the picture, in the front side, it is equipped
with the same
C
and
D
brackets of a DVA MINI G2, so
the front side mounting is the same as seen between
two line-array modules.
In the rear side, the
H
hole and pin allows the desired
tilt selection.
Due to the various possibilities of installation
(positive/negative angles, for example) please refer to
the complete manual of the fly-bar for the complete
mounting sequence and for further details.
A list of the available accessories is shown in the
following table. Please refer to their single
instructions.
CHECK PERIODICALLY THE INTEGRITY AND
THE FUNCTIONALITY OF THE ACCESSORIES
AND OF THE TECHNICAL EQUIPMENTS FOR
A SAFE INSTALLATION. USER SHOULD NEVER APPLY
A LOAD THAT EXCEEDS THE WORKING LOAD LIMITS
OF ANY RIGGING COMPONENTS OR EQUIPMENT
HERE PRESENTED. DESIGN, CALCULATION,
INSTALLATION, TESTING AND MAINTAINANCE OF
SUSPENSION AND STACK SYSTEMS FOR AUDIO
EQUIPMENT MUST BE PERFORMED ONLY BY
QUALIFIED AND AUTHORIZED PERSONNEL. AEB
INDUSTRIALE S.R.L. DENIES ANY AND ALL
RESPONSIBILITY FOR IMPROPER INSTALLATIONS, IN
THE ABSENCE OF SAFETY REQUIREMENTS.
