DBM ACE9600, Руководство программиста

Страница: 71 / 100

Advanced Channel Emulator
dBm
Programmer’s Manual
ACE9600
71
Add/Remove Interface Property
The Add/Remove Interface property allows for adding, removing, or re-ordering the list
of instruments in the current configuration (Figure 28).
Figure 28: Add/Remove Interface Property
To add a new instrument to the configuration, press the "Add New..." button to invoke
the "Add ACE Connect Information" dialog. Enter the IP address, descriptive name and
port numbers in the edit boxes. Press the "OK" button to confirm the connection settings
and add the new connection to the bottom of the list.
To remove an existing device in the configuration, select an item in the list and press the
"Remove" button.
To move an existing device up or down in the list, select the item and press the "Move
Up" or "Move Down" button until it is in the desired order.
To display either the descriptive name or IP address in the Control Bar connection list,
click the corresponding radio button under the "Display on Main View by" title.
To connect the dynamic data run controls of all connected instruments, check the "Link
all instruments" box.