Http://www.dbltek.com
VP-102 / VP-202 User Manual
42
3.
Select
Ring Volume.
4.
Press
Up
or
Down
to increase or decrease the ring volume. Actual ringing is generated to show the ring
level set and the LCD also shows the current ring level setting.
5.
Press
to exit to the last menu level.
Alternative: Ring volume level can also be adjusted while the phone is ringing. Just press Up or Down key
to adjust the volume level.
3.14 Adjusting the Handset Receiver Volume
1.
Pick up the handset
2.
Press
Up
or
Down
to increase or decrease the handset receiver volume as shown on the LCD.
3.15 Adjusting the Speaker Volume
1.
Press the
Speaker
button.
2.
Press
Up
or
Down
to increase or decrease the speaker volume as shown on the LCD.
3.16 Adjusting the LCD Contrast
1.
While the phone is idle, press
Up
or
Down
to increase or decrease the LCD Contrast level as
shown on the LCD.
3.17 Resetting the Phone Configuration
T0 reset the SIP Phone to factory configuration:
1.
Press
Menu
2.
Select SYSTEM TOOLS
3.
Select RESET CONFIG
4.
Press
OK
5.
Enter the Username (default is admin) and Password (default is dbl#admin)
This will reset the entire phone configuration back to factory default settings.
