manualshive.com logo in svg

DBI SALA LAD-SAF, Инструкция пользователя

Поделиться
Скачать
DBI SALA LAD-SAF Скачать руководство пользователя страница 22

22

3.5  INSTALLATION OF CABLE GUIDES, ALL MODELS:

 

Cable guides protect the carrier cable from chafi ng against the 

ladder or structure and to prevent the climber from excessively 

defl ecting the cable from side to side. Cable guides should be 

positioned at approximately 25 ft (7.62 m) intervals along the 

carrier cable between the top and bottom brackets, and at any 

point along the system where the cable may abrade against the 

structure. Cable guides should be staggered along the system 

to reduce harmonic effects of the wind, such as at 23 (7.01), 25 

(7.61), and 27 (8.23) feet (m) intervals. For high wind areas “L” 

shaped cable guides may be used. The “L” shaped cable guides 

should be alternated with opening on the left, then right, etc. up 

the ladder. Latching cable guides are also available.

 

Direct Connection to Ladder:

 

See Figure 19 for a typical installations of cable guides onto 

a ladder. Some cable guides utilize rung spacers and clamp 

plates while others do not (see Figure 3). Install the cable guide 

using the hardware provided. Do not substitute other fasteners. 

Torque fasteners to 20-25 ft-lbs (27.1-33.9 N-m).

 

SO-7 Weld-on Stand-off Support Installation:

 

Install the SO-7 stand-off as shown in 

Figure 20. See section 3.2 for welding 

recommendations. The stand-off must be 

perpendicular to the pole surface and in-line 

with the carrier cable.

 

Angle Leg and Round Leg Stand-off 

Support Installation:

 

See Figure 21 for typical installations of angle 

leg and round leg stand-off supports. Install the 

stand-off support using the hardware provided. 

Do not substitute other fasteners. Torque 

fasteners to 20-25 ft-lbs (27.1-33.9 N-m).

 

Install the cable guide to the stand-off support 

using the hardware provided. Do not substitute 

other fasteners. Torque fasteners to 20-25 ft-lbs (27.1-33.9 N-m).

Figure 19 - Installing Cable 

Guides

CG-15 Cable Guide

CG-3 Cable Guide

CG-5 Cable Guide

Figure 20 - Installing Weld-on Cable Guides

CG-4

Cable Guide

SO-7

Stand-Off

Figure 21 - Installing Angle Leg & Round Leg Stand-off Supports

Содержание LAD-SAF





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды