DBI SALA First-Man-Up, Инструкция пользователя

Страница: 7 / 24

7
the spring plunger and release spring plunger. Ensure spring plunger locks
into place on the strap arm.
Step 3. To install the tie-off adaptor connector tool onto the extension pole, depress
the snap buttons on each side of the tool insert and slide into the open end of
the extension pole as shown in Figure 4. Ensure the snap buttons lock into the
holes on the extension pole. NOTE: Tie-off adaptor connector tool must be
positioned on the extension pole as shown in Figure 4 for proper functioning.
Step 4. Extend the trip cord from the cord reel and attach to the pin on the lever arm
on the tie-off adaptor connector tool. See Figure 5. The trip cord must pass
straight up, without crossing over the pole.
Figure 5