![DBI SALA EXOFIT NEX Series Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/dbi-sala/exofit-nex-series/exofit-nex-series_specific-instructions_4106901003.webp)
3
Figure 1 - Vest Style Harness
Figure 2 - Cross-Over Style Harness
A
A
A.
Belt Loops
A.
Belt Loops
Step 1.
Locate back D-ring held in position by the D-ring pad; lift up harness and hold by this
D-ring. Ensure the straps are not twisted.
Step 2.
Grasp the shoulder straps and slip the harness onto one arm. The D-ring will be located on
your back side. Ensure that the straps are not tangled and hang freely. Slip your free arm
into the harness and position the shoulder straps on top of your shoulder. Ensure that the
straps are not tangled and hang freely. The chest strap, with quick connect buckle, will be
positioned on the front side when worn properly.
Step 3.
Reach between your legs and grasp the gray leg strap on your left side. Bring the strap
up between your legs and connect it by inserting the tab of the buckle into receptor of
quick connect buckle on the left side as shown in Figure 3. You will hear a click when the
tab engages properly. Connect the right leg strap using the same procedure. To adjust the
leg straps, unlock the webbing lock on the quick connect buckle and pull on the strap.
A plastic end keeper on the end of the strap will stop it from pulling completely out of the
buckle. When the strap is properly adjusted, lock the webbing lock. To release the buckle,
press the silver-colored tabs on the buckle towards each other with one hand, while pulling
on the tab portion of the buckle with the other hand.
NOTE:
Locking and unlocking the webbing lock prevents or allows the strap to slide
between the sliding bar and slot on the female end of the quick connect buckle. It does
not control engagement or disengagement of the buckle ends and will not affect the
buckle connection in the event of a fall.
Step 4.
Attach the chest strap by inserting the tab of the buckle into the receptor of the quick
connect buckle. You will hear a click when the tab engages properly. The chest strap should
be 15 cm down from the top of your shoulders. Pass excess strap through the loop keepers.
To adjust the chest strap, unlock the webbing lock on the quick connect buckle and pull
on the strap. A plastic end keeper on the end of the strap will stop it from pulling completely
out of the buckle. When the strap is properly adjusted, lock the webbing lock. To release
the buckle, press the silver-colored tabs on the buckle toward each other with one hand,
while pulling on the tab portion of the buckle with the other hand.
Step 5.
Adjust shoulder straps to a snug
fi
t with the Vertical Torso Adjusters (see Figure 3): Left and
right sides of shoulder straps should be adjusted to the same length and the chest strap
should be centered on your lower chest, 15 cm down from shoulder. The front D-ring on the
vest style harness is moved up or down by adjusting the shoulder straps and leg straps.
Center the back D-ring between your shoulder blades. Note: On applicable models, the back
(dorsal) D-ring can be repositioned up or down as needed for a correct
fi
t. Adjust leg straps
to a snug
fi
t. At least 8 cm of webbing must extend past the buckle on the leg straps. Adjust
the waist belt (if present).
Содержание EXOFIT NEX Series
Страница 91: ...3 1 2 A A A A 1 D D 2 D 3 3 4 15 5 3 15 D D D 8...
Страница 92: ...4 3 ExoFit NEX 1 2 3 4 Duo Lok Quick Connect Revolver A A B A B B 5...
Страница 93: ...5 B EXOFIT NEX ExoFit NEX 2 4 1 D 2 D D 3 4 4 4 5 4 D D ExoFit XP D 8 3 4 D EN361 D D A D D EN358 D 3 5 3 6 3 4...
Страница 94: ...6 4 ExoFit NEX 1 2 3 4 Duo Lok Quick Connect Revolver A B A B 5...