© Copyright 2014, Capital Safety
FORM NO: 5903698
REV: B
ROOF TOP COUNTERWEIGHT ANCHOR SYSTEM 2100180
OR 2100185 WITH LIFTING KIT 2104190
The Ultimate in Fall Protection
Figure 1 - Assembled Roof Top Counterweight Anchor System with Lifting Kit
1
3
5
4
2
6
7
Important:
This instruction 5903698 must
be used when assembling and using the Roof
Top Counterweight Anchor System 2100180
(CE model) or 2100185 (ANSI/CSA model) in
combination with Lifting Kit 2104190. Do not
use instruction 5903602 or 5903726 which are
intended for assembling and using the Roof
Top Counterweight Anchor system 2100180 or
2100185 without Lifting Kit 2104190.
If you intend to add the Lifting Kit 2104190 to
an already-assembled Roof Top Counterweight
Anchor System 2100180 or 2100185, the Roof
Top Counterweight Anchor System must be
completely disassembled and then reassembled
by following this instruction 5903698.
1 - Roof Top Anchor 2 - ID Label 3 - U-Bolts (4) 4 - Lifting Kit Bracket (4) 5 - Black Rubber Coated Base Weights
6 - Counterweights 7 - Lifting Kit Webbing (4)
WARNING:
These instructions must be provided to the user of this equipment. The user must read and understand these instructions
before using this equipment. Manufacturer’s instructions must be followed for proper use and maintenance of this equipment. The user
must follow the manufacturer’s instructions for each component of the system. Alterations or misuse of this product or failure to follow
instructions may result in serious injury or death.
IMPORTANT:
If you have questions on the use, care, or suitability of this equipment for your application, contact Capital Safety.
IMPORTANT:
3ULRUWRLQVWDOODWLRQDQGXVHRIWKLVHTXLSPHQWUHFRUGWKHSURGXFWLGHQWL¿FDWLRQLQIRUPDWLRQIURPWKH,'ODEHOLQWKH
Inspection and Maintenance Log at the back of this manual.
USER INSTRUCTION MANUAL
