VIO S218F
420120416Q REV1.0
QUICK START USER MANUAL SECTION 1
6
WARNINGS!
Only expert personnel may use the product and its accessories! To prevent hazards to people, animals and/or objects, make sure that
the installation is stable and secure. Comply with the safety regulations and laws in force in the country in which you use the product.
For safe use, periodically check that all parts are in good working condition before use. Only authorised personnel may carry out design,
calculations, installation, testing and maintenance of professional flown or stacked audio systems. AEB Industriale shall not be liable for
improper installation carried out without adequate safety measures.
Never suspend the speakers from the handles! Only use the accessories and configurations described in this manual, and proceed in
accordance with the instructions given in the manuals for the accessories.
Do not obstruct the amplifier cooling fins at the back. In the event of overheating, the audio volume is gradually reduced until the
module is thermally stable. The level is automatically restored on reaching the correct operating temperature.
Do not attempt to open the amplifier.
In the event of malfunction, immediately turn off the power, disconnect the unit from the mains and contact an authorised service centre.
Only use the power cable provided.
The USB SERVICE DATA connection is to be used exclusively for updating the product’s firmware; do not connect any other USB device to
the unit to avoid the risk of damage and malfunction.
Do not use the monitor for a prolonged period with the limiter LED steadily lit or flashing as this indicates operation under stress with
excessive distortion.
Check periodically the integrity and the functionality of the accessories and the technical equipments for a safe installation. user should
never apply a load that exceeds the working load limits of any rigging components or equipment here presented. design, calculation,
installation, testing and maintanance of suspension and stack systems for audio equipment must be performed only by qualified and au
-
thorized personnel. AEB Industriale s.r.l. denies any and all responsibility for improper installations, in the absence of safety requirements.
