dB Technologies Ready 4, Руководство пользователя

Страница: 46 / 100

45
ENGLISH
ACCESSORIES
MBT-1 Bluetooth receiver module
The amplifier module of the Ready 4 speaker is ready to house the MBT-1
module, for wireless connection with Bluetooth devices (Personal Computers,
tablets, cell phones, etc....).
The MBT-1 Bluetooth receiver is optional and is sold separately at the request of
the customer.
Installation
To install the MBT-1 module you need to perform the following operations:
•
On the rear side of the speaker, open the Bluetooth module cover by removing the two screws.
•
Insert the MBT-1 module into the relevant compartment; make sure that the connector is properly
plugged in.
•
Close the cover back, using the screws you previously removed.
BLUETOOTH input
The Bluetooth input allows to easily connect the unit to remote devices by a wireless connection; the
devices in question must also be Bluetooth-enabled.
This input is mainly used to listen to audio files.
The volume of this input is adjusted through the “MEDIA VOLUME” control (8).
Display
This menu allows to enable the “BLUETOOTH MODULE” input.
Press the OK button to enable and/or disable the function.
When the function is enabled the menu icon will be displayed in the status bar; now
you can connect to Ready 4 using a remote device.