dB Technologies Ready 4 MK2, Руководство пользователя

Страница: 29 / 104

28
ENGLISH
DESCRIPTION
READY 4 MK2
is a two-way bi-amplified speaker, designed for mobile use, which doesn't need to be
connected to the mains.
The
READY 4
MK2 speaker is equipped with the modern digital amplifier DIGPRO® G2, which can deliver
a power of 200W.
The DIGPRO® G2 amplifiers use power supplies which are based on the SMPS (Switched-Mode Power
Supply) technology. Thanks to its low power dissipation, the amplifier module can be cooled passively,
without the help of any fan.
READY 4 MK2 can be powered: by the built-in 12V lead battery, by the mains (100-240Vac) or by a 15Vdc
adapter (not included). This provides great versatility and allows the speaker to be used under any
condition.
The lead battery can be easily replaced if depleted. The rear panel allows to quickly replace it, thus
prolonging the operating time of the
READY 4
MK2 speaker when not connected to the mains.
Even though it is designed to operate when battery-powered, don't use the equipment while
it is directly exposed to the presence of liquids (like swimming pools, tanks and/or liquid-holding
containers, etc.) and/or in dusty environments, as the equipment is not protected against the possible
seepage/infiltration of foreign bodies, dust and liquids, which may affect its operation.
The digital pre-amplifier with DSP (Digital Signal Processing) manages all the sound parameters. Some
parameters can be accessed by the user (Volume, Eq, etc), while other ones are factory set (crossover freq.,
phase management etc).
Using the keys located under the OLED display you can check the speaker status and enable the different
functions. This display features an automatic power-off function to limit battery consumption along time.
The
READY 4
MK2 speaker is equipped with a radio receiver device, allowing to establish a connection
with wireless transmitter radio microphones, which are sold separately.
The pre-amplifier module features a Bluetooth® interface, allowing to establish a connection with devices
which support the same technology, like phones, PCs, etc.
READY 4
MK2 is made of high-resistance plastic material and is equipped with a top handle for easier
carrying. The lower section of the box is equipped with a standard stand support (diam.36mm).