www.dbtechnologies.com
INGENIA IG3T
Rev 1.1 cod. 420120239Q
8 –
Auto-range mains (power) input.
9 –
Mains (power) link output.
10 – Mains fuse.
The fuse is factory setted for 220-240 V operation.
If it is necessary to change the fuse to 100-120V range:
1.
Disconnect the speaker from any cable
2.
Wait 5 minutes
3.
Substitute the fuse with the correct one supplied
Use only cables with
Neutrik®
connectors!
4) Ready in less than a minute – Build System menu
The internal DSP provides an easy setup of installation
and allows to configure quickly the IG3T. Even if you
turn off the speaker, your setting will be saved for the
next session!
Set up instructions
Once
you
have
properly
connected the power supply
and audio input (remember to
select the proper “LINE”/”MIC”
choice in input sense switch (7)),
select the gain level in the first
display window, rotating the
push rotary encoder, then push
it to access the menu choice
wizard.
1.
Select
and
confirm
“Build System”,
2.
Select and confirm the
"Selfcheck System” to
launch the automatic
recognition procedure
and select and confirm
“NEXT”
3.
In the next “System
Structure” menu you
can find the number of
“Speakers” automatically recognized, and you
can choose and confirm the number of
“Subwoofers” you want to use in your
configuration. Then select and confirm “NEXT”
4.
In “System Type” you can specify the “Stacked”
(on the floor - pole mounting – subwoofer
mounting) or “Flown” (fly-bar mounting) type
of installation. Then select and confirm “NEXT”
Holding the rotary encoder, you return to the main
Gain/Level window, from each submenu window.
If the system has automatically recognized the
presence of 2 speakers, the next menu will be “System
coverage”. If you have selected the presence of a
subwoofer in your installation, the next menu will be
the “Subwoofer Matching” menu.
5) System Coverage
The INGENIA IG3T’s powerful
DSP can act as a custom delay
line on the transducers, in
order to direct the final acoustical coverage of the
speaker. This menu will appear only when the DSP has
recognized 2 IG3Ts thanks to the infrared handles.
You can choose up to 7 factory settings:
a.
UP +10°, for the maximum inclination angle
(with speakers mounted on the floor, on a
stand or a subwoofer)
b.
UP +5°, for a medium inclination angle (with
speakers mounted on the floor, on a stand or
a subwoofer)
c.
UP +2.5°, for a low inclination angle (with
speakers mounted on the floor, on a stand or
a subwoofer)
d.
FAR 0°, for the maximum distance coverage in
a position directly at the level of the audience
e.
DOWN -2.5°, for a long-distance coverage
(flown speakers)
f.
DOWN -5°, for a medium-distance coverage
(flown speakers)
g.
DOWN -10°, for a short-distance coverage
(flown speakers)
6) Subwoofer Matching
Once you have chosen to
match the system to one or
more subwoofers, a menu
will appear allowing you to
select: the model and the HP
Filter frequency, and the system will suggest you the
correct subwoofer delay.
7) System Delay
You can set a custom delay
on your speakers in
milliseconds, meters or feet,
in order to align your
speakers with the main sound system (see the picture
below).
8) Stage Alignment
When you are on stage and
you have different acoustic
sources (for example the
drums of a band) you can choose to align your
speaker with those sources. In this menu you can set
the distance in meters or feet, or the time in ms.
SUPERUSER PASSWORD
You can set a Password in OPTIONS
PASSWORD
in order to protect your custom settings.
If you forget the password, use the code:
Q2R5D9
to unlock the system.