AW_DD650_manual_G04_150923.ai 9 2015/9/23 16:12:29
Getting Ready to Play
Setting up the Power Supply
1.
Connect the DC plug of the AC power adaptor to the DC IN jack on
the rear panel.
2.
Connect the other end of the power cord to the AC outlet.
Note:
1.
Only use the voltage specified as correct for the drum module.
2.
Even when the module is turned off, electricity is still flowing to the
module at the minimum level. When you are not using the drum
module for a long time, make sure to unplug the AC power adaptor
from the wall AC outlet.
Turning the Power On/Off
Turning the power on
Make sure that you have made all necessary connections (trigger,
audio and so on), turn down all volume controls of the module and
other audio equipments.
1.
Turn both the [VOLUME] knobs always to minimize the volume.
C
M
Y
CM
MY
CY
CMY
K
2.
Press the [POWER] button.
3.
Turn the amplifier or audio system on, or listen to the headphones.
4.
Striking the pads and adjust the volume by slowly turning the
[PHONES VOLUME] and [MAIN VOLUME] knob towards the right
direction. Keep turning until you get an appropriate value.
Turning the power off
1.
Minimize the volume of the module and audio device.
2.
Turn the connected external audio device off.
3.
Keep pressing the [POWER] button until the power is turned off.
Hint:
You can restore the factory set by following steps:
a) Press the [<] and [>] buttons simultaneously.
b) Press [POWER] button.
c) Until the LCD displays
“FactoryResetting…”. Complete reset
operation, the module will return to the KIT MENU.
About the Auto Power Off Function
For purpose of energy conservation and environmental protection, this
function automatically turns the power off if there isn't any operation
(eg, playing, striking , button pressing and so on) for about 30 minutes.
You can enable or disable this function as you like. Refer to
Utility
Settings
.
9
