Dazon Raider mini 90S, Руководство по обслуживанию

Страница: 54 / 60

Raider Mini 90 (single/double-seat): Service Manual Version
：
2.0 Feb. 2006
54
5.5Front Hubs
a) Check the seals for rips or tears, and replace them if
any exist.
b) Remove the bearings with a punch from the opposite
side.
c) Inspect the bearings for easy movements;
If any dirt or mud has gotten into them, wash them in
the cleaning solvent and spin with your finger.
NOTE : Never spin them with the compressed air.
d)
Apply an ample amount of grease to the bearing and reinstall it with a bearing tool,
making sure that they go in straight;
If the bearing isn’t straight, damages to the hubs can occur.
e) Install the seals into the hubs;
It is recommended to apply a small amount of grease to the lip of the seal;
If the retention spring is in bad shape, replace the seal with a new one.
5.6 Seat
a) Remove all the nuts and bolts underneath the
seat rail.
b) Remove the seat.
5.7 Steering Shaft
a) Remove the nuts on the steering block, and grease the inside of the steering block
periodically.
b) Loosen the steering shaft and clamp nut on the steering gear box.
c) Remove the steering shaft.