6
INSTALLATION GUIDE
CUTOUTS
The SBA302-BT will require 3 cutouts to be made in your soundbar.
1) The first is for the back panel, which also houses the amplifier module that contains all of the inputs, outputs, and
power connections. This will usually go on the back of your soundbar.
2) The next cutout needed is for the control panel for the amplifier, which will house various controls such as power
switching, input switching, and preset controls.
3) The last cutout will be for the front panel, which houses the IR sensor target and also the status LEDs.
SBA302-BT User Manual.indd 6
SBA302-BT User Manual.indd 6
10/18/21 1:40 PM
10/18/21 1:40 PM
