Default Register Configuration in SigmaStudio
These are the default register settings for a KABD-250 or KABD-230 (and the entire KABD series). It is
setup for proper I2S settings for Bluetooth Input, and also sets up the 4 POT ports for potentiometers (if
using switches, see other section). MP2, MP3, MP8 and MP9 need to be set to ADC for usage with
potentiometers. T
hese could be set up as “Input GPIO debounce” if using buttons or switches.
If using an example project for the KABD, this will already be configured for you. If upgrading from an
older DSPB project or creating a project from scratch, make sure your register settings match the screen
below. If unsure, modify an example project to suit your project’s needs rather than starting from
scratch.
