Important Safety Instructions
To reduce the risk of electric shock, do not remove cover. No user
serviceable parts inside. Refer servicing to qualified personnel. To
reduce the risk of fire and shock do not expose unit to rain or moisture.
The unit should be connected to an earth grounded AC electrical
socket. The unit should be operated in a well ventilated area. Minimum
clearance is 2 inches from the ventilation openings.
HYBRID STEREO
TUBE AMPLIFIER
Model: HTA100BT User Manual
Dayton Audio
®
Last Revised: 4/20/2020
daytonaudio.com
tel + 937.743.8248
705 Pleasant Valley Dr.
Springboro, OH 45066
USA
5-Year Limited Warranty
See daytonaudio.com for details
Specifications:
Power Output:
............................. 50 watts RMS x 2 into 4 ohms
Total Harmonic Distortion:
........ 0.5% @ 50W per channel
Minimum Speaker Impedance:
.. 4 ohm
Frequency Response:
................ 20-20,000 Hz, ±2 dB
Channel Separation:
................... 50 dB
Preamplifier Tube:
...................... 6U1 x2 6F2 x2
Bluetooth Version:
...................... 4.2
Input Impedance:
........................ 47k ohms (minimum)
Input Sensitivity:
......................... 250 mV
Dimensions:
................................ 6.6
″
H x 11.5
″
W x 10.6
″
D
Weight:
........................................ 11 lbs
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(a) This device may not cause harmful interference.
(b) This device must accept any interference received, including interference that
may cause undesired operation.
2. FCC Radiation Exposure Statement: Mobile device.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency expo-
sure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during
normal operation.