8
Operating the PC Application
1. Mixer:
The user can select what percentage of each input is routed to each output simply by
using the sliders.
2. Master Volume:
The user can control the volume of the system by moving the slider up or down
3. Channel Level:
The user can control the level of each channel by moving the slider up or down
4. Mute:
The user can mute a channel by pressing the speaker button, to undo, press again.
5. Time Alignment:
a. Unit of Measure:
At the bottom of the screen, you can select either
“
ms
”
,
“
cm
”
, or
“
in
”
as the
unit of measure.
Note: Switching between unit of measurements will erase all values.
b. Controlling Delay:
Click on the desired channel, then on the “Delay” box, and either enter
a number or use the up key to increase the delay, and the down key to decrease the delay.
Note: Only whole number increments can be entered so the shortest delay is 1 cm which
equals 0.294 ms or 0.394 in.
6. Phase Adjustment:
The 0° button can be pressed to invert the phase 180°, to revert back,
press the 180° button.
7. Linking:
The user can choose to link multiple channels together which allows for grouped
control over the EQ and crossovers. To create a link between channels, click the
“
Link
”
button
below each channel that you would like linked. To start a new set of linked channels, double
click the
“
Link
”
button for the channel you would like to start the new link with.
