Specifi cations
Model number
CS620W
Woofer
6.5" poly cone
Tweeter
1" Mylar
Frequency response (Hz)
50-20,000
Dimensions H x W x D (in)
12" x 8-1/2" x 3-1/2"
Cut-out size H x W (in)
10-3/4" x 7-1/4"
Power handling (RMS/Peak)
60/85
Impedance
8 ohm
SPL (1W/1m)
89 dB
10) Caring For Your In-Wall Speakers
The two most common ways that in-wall speakers are permanently damaged:
1) Not enough power at higher volumes.
2) Too much power at higher volumes.
Contrary to conventional wisdom, far more speakers are damaged as a result of underpower-
ing, than by overpowering. When a receiver runs out of power, it still tries to reproduce the musical
signal by “clipping” the waveform. At loud volumes, this clipping introduces gross amounts of distor-
tion to the speaker, eventually destroying it. If the sound from your in-wall speakers starts to sound
distorted, turn down the volume.
Having plenty of reserve power will help your speakers reproduce dynamic contrasts and quick
transients of music much more effectively. But you do have to exercise good judgement; too much
power will also permanently damage a speaker. Again, if you hear distortion, turn the volume down.
Dayton Audio
®
Last Revised: 3/10/2017
daytonaudio.com
tel + 937.743.8248
[email protected]
705 Pleasant Valley Dr.
Springboro, OH 45066
USA
Содержание CS620W
Страница 1: ...In WallSpeaker Models CS620W UserManual ...
