2021/06/21
80458 PAGE 7/9
GREASE
#29. BOLT, HEX SOCKET M5X15 (3)
#28. BOLT, HEX SOCKET M6X50
#38. PIN, TIMING SET
#10. COVER, TIMING GEAR
#8. SPROCKET, TIMING
8N-m
#35. WASHER, SEALING 6mm
10N-m
#22. O-RING, G65
#37. WASHER, PLAIN 5mm (3)
#8. SPROCKET, TIMING
#9. CAM CHAIN
Align the mark on the cylinder head
with the mark on the sprocket.
(Make sure the piston is
at top dead center.)
CAMSPROCKET MARK
4. VALVE TIMING SPROCKET
Attaching the cam sprocket to the cam chain.
OIL
Adjust the piston to top dead center.
CIRCLIP
SHAFT
GEAR
Remove the circlip and push the shaft in slightly.
Hook the sprocket to the cam chain.
Put the shaft back in and install the circlip.
Be careful that the gears do not fall out.
CYLINDERHEAD MARK
Caution
！
