Page 5
For technical questions, please call 1-888-866-5797.
Item 58986
5. Make sure one end of the Chain is secured
to the Lock Pin. Loop the Split Ring through
the hole on the end of the lock Pin.
6. Attach the other end of the Chain to the
Metal Loop on the Base. Loop the Split
Ring through the Metal Loop.
Metal Loop
Split Ring
Chain
Lock Pin
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
WARNING! TO PREVENT SERIOUS INJURY: Be
ready for any movement the vehicle may make
when the tires come off the ground. Ensure that
you have sufficient assistance and manpower
to safely guide and control the vehicle.
WARNING! TO PREVENT SERIOUS INJURY:
Stay clear of any sloping areas or entry ramps,
however shallow they may appear. Sufficient
space should be allowed between the side of the
vehicle and an adjacent wall for the vehicle to be
withdrawn from its location in a sideways manner.
1. Lift vehicle high enough to roll the Dollies underneath.
Note:
Place one Dolly on each side of the
vehicle body under the frame pinch weld.
2. Remove the Lock Pin and raise the Saddle
to the necessary height, then re-insert Lock
Pin and secure with Loop Wire Lock.
3. Align the Saddle opening with the pinch weld.
4. Loosen the Saddle Bolts and open
the Saddle wide enough for the frame
pinch weld to fit into the openings.
5. Begin slowly lowering the vehicle
body onto the Saddles.
Note:
Check that the pinch welds are properly lined up
with the Saddle openings before lowering completely.
6. Lower the vehicle completely.
7. Secure the vehicle to the Dollies by
tightening the Saddle Bolts.
8. Lock the Casters when the Dollies are
in thier final position by pressing all six
Caster Locks into the “ON” position.