Page 6
For technical questions, please call 1-888-866-5797.
Jack Stand
Record Product’s Serial Number Here:
Note:
If product has no serial number, record month and year of purchase instead.
Note:
Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts. Parts may not be interchangeable.
Specify UPC number when ordering:
3 Ton - UPC 193175438898
6 Ton - UPC 193175438928
12 Ton - UPC 193175446794
Maintenance and Servicing
Procedures not specifically
explained in this manual must be
performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL
FAILURE:
Do not use damaged equipment.
If abnormal noise or vibration occurs, have
the problem corrected before further use.
1. Periodically clean the bottom of the Bases and
top of Posts of any dirt, grease, or debris.
2.
Before each use,
inspect the general condition
of the Jack. Check for broken, cracked, or bent
parts, loose or missing parts, and any condition
that may affect the proper operation of the
product.
Do not use damaged equipment.
Discard Jack Stand if damaged or deformed.
3. Periodically lubricate release handle pivot points.
