3
1.
Mark recommended installation height, cabinet
and bracket center positions
(refer to Wall
Mounting Hole Position Table). (See Fig. 1)
2.
Drill two cabinet mounting holes with 10mm
(25/64”) diameter x 50–60mm (2.0-2.4 inch)
depth on the cabinet wall side.
(See Fig. 2)
3.
Drill four mounting holes with 10mm
diameter x 50–60mm (2.0-2.4 inch) depth
on the bracket wall side.
(See Fig. 3)
4.
To install bracket, insert plastic plug into
the hole and secure bracket with screws
and tighten into position.
Repeat to install
second bracket. (See Fig. 4)
5.
To install cabinet, insert plastic plug into
the hole and affix screws leaving 10-15mm
(0.4 – 0.6 inch) distance from shoulder
head to the wall.
(See Fig. 5)
6.
Align and locate cabinet mounting hole
into screw and pull down slightly to secure
correctly.
Ensure unit is sitting flat and if
required reduce distance of screw from the
wall to suit. (See Fig. 6)
GROUND
LEVEL
Users
Height
+
100mm
(+4 inches)
7 meters (23 feet)
CABINET
WALL
SIDE
BRACKET
WALL
SIDE
1
4 Line – 551mm / 21.6 inches
5 Line – 681mm / 26.8 inches
6 Line – 811mm / 31.9 inches
PRODUCT
CENTRE LINE
2
4 Line – 225mm (8.9 inches)
5 Line – 355mm (14.0 inches)
6 Line – 225mm (8.9 inches)
35mm
35mm
PRODUCT
CENTER LINE
3
4
MOUNTING HOLE
WALL
6
10-15mm
(0.4 – 0.6 inches)
WALL
VIEW FROM
ABOVE
5