DaySequerra DownMix, Руководство пользователя

Страница: 16 / 20

16
DownMix User Manual
Network Menu
DownMix has several configurable network settings. All of the DownMix network settings are password
protected. The password to change the network settings is
dnmix123
. Please take note when entering
the password that the DownMix password is case sensitive. DownMix is configured to take a DHCP
address by default.
Device Name:
Allows you to change DownMix’s name as reported to DNS. Press ENTER while the
cursor is over this field to go into data entry mode. Turn the rotary encoder to scroll through the
available choices of letters (A-Z, 0-9 and _ (underscore)) and press enter to move on to the next field.
Turning the rotary encoder again will start to scroll through the choices for the next letter, or pressing
ENTER accepts the name.
DHCP:
Configures DownMix to look for a DHCP server for IP configuration. (Enabled or Disabled)
IP Address:
If DHCP is set to disabled, allows you to enter the desired IP address manually. Press
ENTER while the cursor is over this field to go into data entry mode. Scroll through the available
numbers (0-255) and press ENTER to move to the next octet.
MAC Address:
Displays DownMix’s MAC address if needed for firewalls or DHCP IP address
assignments.
Diagnostics Menu
Current Faults:
Displays any error states that DownMix may be in.
DSP Utilization:
Shows the current load on DownMix’s processor.
LED Test:
Turns on all front-panel LED indicators to verify their functionality.
Meter Brightness:
Allows adjustment of DownMix’s Input and Output meters.
Display Brightness:
Allows adjustment of DownMix’s display output.
Restore Settings:
Returns all settings to their factory default values and reboots the unit. Network
settings will not be lost.
Reboot Unit:
Performs a warm boot. No settings are erased or restored to defaults.
GPIO Output:
Allows for testing of the internal signaling circuit within DownMix. The two fields
displayed represent each output, 1 and 2, respectively.
GPIO Input:
Shows the current state of the GPIO inputs. The four fields of the displayed status
represent each input, 1-4, respectively.