background image

44

Issued: 24.02.2005

S T R I D E R   M D

Please also see the information given in the chapter entitled “Things to
know“.

12.0 Charging the batteries

Charging information:

• The surrounding temperature should be between 10° and 30° Celsius.

The charging time will increase at lower temperatures.

• Only use the original battery charger (included in delivery).

• Only use the battery charger in a dry and well-ventilated room.

• Do not cover the battery charger and ventilation slot while charging

batteries.

• The battery charger has an automatic switch-off device which

prevents overcharging the batteries. Do not leave the battery
charger connected to the scooter for more than 24 hours.
- The batteries can be charged overnight.

• Switch the Strider off before charging the batteries.

Charging the batteries

When is charging required?

• the battery charge display is in the red area

• after the final journey of the day

• at least once per week

Charging times:

Between 8 and 14 hours depending on current battery charge state.

12.1 Preparing the battery charger

Plug the mains cable plug (1) into the
jack socket (2) on the battery charger.

Connect the mains cable

 NOTE
The battery charger is designed to be able to charge completely
discharged batteries within eight hours to 80% of their capacity.

Содержание Strider MD 4































































































Отзывы: