9
Transportation
To assist you in storing the chair for transportation. First remove the
footrests, fold down the rear push handles and fold the chair as described
in earlier paragraph.
Ensure the back upholstery folds to the rear of the chair and in a tidy
manner. We recommend that you do not sit on your wheelchair when in a
vehicle, but transfer to a vehicle seat.
The self propelled wheelchair has quick release wheels which may be
removed for storage or transportation. See for Removal and Fitting of Rear
Wheels below.
Removal of Rear Wheels (Self-propelled Models)
The rear wheels are removed by depressing the pin at the centre of the wheel hub and withdrawing
the wheel.
Fitting Rear Wheels (Self-propelled Models)
The Days Escape Lite wheelchair self-propelled is fitted with quick release rear wheels. It is important
to ensure that wheels are correctly fitted to avoid accidents.
To fit rear wheels depress rubber cover at the centre of the wheel hub and push the wheel spindle
firmly into the axle bush, ensuring that both ball bearings are fully exposed beyond the axle bush.
Once located, test the wheel for security by pulling the wheel firmly in an attempt to remove it without
depressing the rubber cover.
Maintenance & Inspection
We recommend that your wheelchair is serviced by your local dealer every twelve months. It is in your
best interests, not only to ensure your personal safety but also to ensure long life and reliability. Regular
service will identify early damage and worn components avoiding unnecessary faults occurring.
Weekly check that:
• Manual brakes do not rub the tyres and
secure the wheel when locked
• Castor bolts are tight and all fasteners
are secure
• The drive wheels axles are secure and there
is no excessive side movement or binding
when spun
• Tyres do not show excessive wear or damage
• Castors have proper tension, i.e. spinning
castors should come to gradual stop
Monthly check that:
• Tyres are not excessively worn
• The chair rolls straight (no excessive
drag or pull to one side)
• Pivot points are free of wear or looseness
• Seat and backrest upholstery is not for
ripped or sagging
• Frames are not worn or bent
Cleaning
Paintwork and plastic mouldings can be cleaned with a damp soft cloth of warm soapy water. Do not
use any harsh abrasive cleaners, bleach base fluids or solvents.
Seat and back upholstery can be cleaned with a general purpose upholstery cleaner or sponged with
warm soapy water.