DayMark ROAD WARRIOR, Руководство пользователя, Страница: 15 / 32

15
Charging the Road Warrior
First take the charger that came with your Road Warrior and plug it into the the wall. Once
you have done that locate the charging port of the Road Warrior located on the inside of
the glove compartment. You must unlock the glove compartment with your keys and look
for a plug that is covered up. It will be covered up as seen below:
Once the bike is charging the charger will glow red. When the unit is fully charged the
charger will glow green and then your bike is ready to go.
Warning
Do not leave the Road Warrior charging for long periods of ti me aft er it is fully charged.
Once the bike is charged unplug it ASAP.
Accessing your Circuit Breaker
To prevent surges, we have installed a circuit breaker.
If you are unable to get power to your bike more
than likely your circuit breaker has been triggered
and needs to be switched to the on positi on.
To do this:
Put the key in glove box to unlock it. It is located
inside the glove box underneath the charging port