Congratulations on your Purchase
of the 3 Line Marker (DM5)
For Parts, Assistance, or Additional Information Call:
1-800-847-0101
12830 South Dixie Hwy. • Bowling Green, OH 43402 • Fax 419-354-0514
or visit us at www.daymark.biz
Pull open
Label
Holder Arm
by
pulling slightly
towards you
and then
upwards.
Place the
Label Roll
onto the
Label
Spindle
and shut
the
Label
Holder
Arm
.
Feed approximately 12"
of labels through the
Throat
of the marker,
making sure it goes
between the
Sprocket
and the upper part of
the
Print Base
.
Lay the label stock back
over the
Print Base
and
position a few
Sprocket
Spindles
to line up with
the holes in the label stock.
Label stock will
automatically
feed out
through the
Operating Lever
.
Open the
Bottom
Cover
by pinching
the plastic tab and
lifting the
Bottom
Cover
away from
the marker. Also,
pull out the
Print Base
until it stops
Turn the marker upside
down and thread the
labels through the slot
in the
Print Base
as shown.
Shut the
Bottom
Cover.
Squeeze and release
the
Operating
Lever
to dispense
labels
.
Note: This step is
easier if you create
a slight crease along
the length of the
labels
Loading Instructions
Please read the following instructions before operating this machine.
GLOSSARY OF TERMS
•
Facing side plate is shown removed for diagram purpose only.
LABEL
SPINDLE
LABEL ROLL
LABEL HOLDER ARM
(Left Arm Swivels Up)
OPERATING LEVER
SPROCKET SPINDLES
INK ROLLER HOLDER
BOTTOM COVER
PRINT BASE
INK ROLLER
HEAD ADJUSTMENT
SCREWS (3)
DIALING SHAFTS (3)
(On Opposite Side of Nylon Shafts)
THROAT
TEAR BLADE
LABEL PATH
SPROCKET
"GUFSEJBMJOHJOEJGGFSFOUJOGPSNBUJPOEJTDBSEUIFGJSTUMBCFM