Daymak Falcon RLC-11V, Руководство пользователя

Страница: 8 / 14

8
5) Holding the handlebar with both hands move your body weight slowly forward and
the vehicle should move forward slowly; move your body weight backward, and the
vehicle should stop. The vehicle’s forward and backward movement should be
controlled and change according to your body movement.
6) Tilting the handlebar controls the direction of the vehicle. Simultaneously, your
bodyweight can move slightly with the handlebars to the left or right. Lean your
bodyweight into the turn to maintain balance. The rate of turn and turning angle
varies according to speed. In general, the greater the angle of the handlebar, the faster
the turning speeds. Note: When reversing, the control direction of the handlebars is
reversed.
7) Dismounting: When you need to get off, pull back the handlebar and shift your
bodyweight vertical to stop. When the vehicle has stopped completely, remove one
foot, holding the handlebar and keeping your body leaning forward to maintain the
vehicle stability, then take your other foot down. Note: when the vehicle is on, do not
release the handlebar so you remain in control of the vehicle.
8)
Switching off: when getting off, Shutdown the self balancing personal transporter.
Note
If the Anti-Fall function is in use, the safety strap must be attached to the rider’s body
before stepping on the vehicle; in case balance is lost, the power will be shut down.
6
6 6
6 ....
Operational
Operational Operational
Operational Conditions
Conditions Conditions
Conditions and
and and
and Maintenance.
Maintenance. Maintenance.
Maintenance.
1) While riding, if the alarm goes off and the handlebar vibrates, slow down!
2) While riding forwards at excessive speed, the handlebar and the self balancing
transporter will automatically begin to lean backwards to slow down the vehicle, and
allow the rider to move back to ensure a safe speed. This is a speed limiting function.
3) Before operation, you must check to ensure that the handlebar, wheels, batteries, wheel
guards and other parts are installed correctly and securely. Screws may loosen from
vibration during operation. You may need to tighten screws to avoid loss of power,
unwanted vibration or other incident which could cause hazards or injury.
4) While riding, if any abnormal sound is heard, STOP, Dismount and check the vehicle
before riding again.
5) The Self Balancing Personal Transporter is a sophisticated electronic product, and its use
involves risk. Non-professionals maintenance should not be carried out. In the event of
failure please bring it to an authorised repairer. No unauthorised repairer shall
disassemble or attempt repair, such repairs shall invalidate warranties and shall incur
repair costs.
6) Parts Replacement schedule:
a) Direction potentiometer: Replace annually or each 1,000km