Daymak Beast 2.0 D, Руководство пользователя

Страница: 16 / 20

16
Circuit Breaker
To prevent surges that may damage the unit, the Beast comes with a circuit breaker. This is
located underneath the seat just above the controller.
There is a blue switch that in the event of a surge will trigger and turn the whole unit off .
In the event that your unit does
not turn on at all (the display
does not light at all once the
key is in the ignition) it is most
likely that the circuit breaker
is set to off . Open the seat lock
(see previous page for where
the lock is located) and switch
this switch to on.
Mirrors
The Beast comes with a set of mirrors that screw
on each handlebar. Screw each mirror into the
appropriate side (left mirror on left side etc).
Until it is loosely in the position you want. Then
take a wrench and tighten the bolt at the bot-
tom of the mirrors to make it stick in that posi-
tion.
Please note mirrors may look slightly diff erent
then shown here