DAYLIFF SUNFLO-A 150H, Инструкция по установке и эксплуатации

Страница: 11 / 16

8
Pump Power,
Watts
120
Pump
Voltage
Battery Capacity Series Connection
300
500
24
24
48
2No. 18Ah/12V
2No. 35Ah/12V
4No. 35Ah/12V
2No. 35Ah/12V
2No. 100Ah/12V
4No. 100Ah/12V
4. SYSTEM OPERATIONS
4.1 PUMP
Generally pump operation is fully automatic with pump flow starting with low output at
around 8am building to a peak at mid-day and stopping around 5pm. Output will vary
with conditions with low output during rainy or clouded periods. Equipment is water
lubricated and requires no maintenance though periodically it is important to clean the
module surface of dust and debris and check the installation for damage.
4.2 CONTROLLER
4.2.1 SunFlo-S
For battery operated systems a charge controller (supplied in the system) is required. The
controller must not be used for systems without batteries as performance will be impaired.
Charge controllers are fitted with LED indicators for fault, battery and working status;
automatic 12/24 identification, overload protection and anti-reverse protection.
Units
PV
BAT
LOAD
Battery
Charging
at daytime
Load
LCD Icon Indicated Item
Solar Panel Parameter
Status
Output
Parameter
Indicator
Charge Controller Display
Battery Parameter
Load discharging
Parameter
Daytime or Charging
Night recognition
Load short-circuit or
overload
Load turned on
Load turned off
Battery in normal state
Over discharge
Over voltage
Steady on
Steady on
Steady on
Steady on
Steady off
Quick Flashing
Steady on
Steady off
All lighting up
Only the frame flashing
The frame and 3 dashes
all flashing
2hrs 5hrs