background image

7.  TERMS OF WARRANTY

i)  General Liability 

ii)   Standard Warranty

17

•   In lieu of any warranty, condition or liability implied by law, the liability of 

Dayliff (hereafter called the Distributor) in respect of any defect or failure 
of equipment supplied 

is limited to making good by

 

replacement or 

repair

 

(at  the  Distributor  discretion)  defects  which  under  proper  use 

appear  therein  and  arise  solely  from  faulty  design,  materials  or 
workmanship  within  a  specified  period.  This  period  commences 

immediately  after  the  equipment  has  been  delivered  to  the 
customer

 and at its termination all liability ceases. Also the warranty 

period will be assessed

 

on the basis of the date that the Distributor is 

informed of the failure.

•   This warranty applies solely to equipment supplied and 

no claim for 

consequential damages,

 however arising, will be entertained. Also 

the warranty specifically excludes defects caused by fair wear and tear, 
the effects of careless handling, lack of maintenance, faulty installation, 
incompetence on the part of the equipment user, Acts of God or any 
other cause beyond the Distributors reasonable control. Also, any repair 
or  attempt  at  repair  carried  out  by  any  other  party 

invalidates  all 

warranties.

General Terms

If equipment failure occurs in the normal course of service having been 
competently  installed  and  when  operating  within  its  specified  duty  limits 
warranty will be provided as follows:-

Ÿ

Up  to  one  year  -  The  item  will  be  replaced  or  repaired  at  no 
charge.

Ÿ

Over one year, less than two years - The item will be replaced or 
repaired at a cost to the customer of 50% of the Davis & Shirtliff 
market price.

The warranty on equipment supplied or installed by others is conditional 
upon  the  defective  unit 

being  promptly  returned  free  to  a  Davis  & 

Shirtliff ofce

 and collected thereafter when repaired. No element of site 

repair  is  included  in  the  warranty  and  any  site  attendance  costs  will  be 
payable in full at standard chargeout rates. 
Also proof of purchase including the purchase invoice must be provided for 
a warranty claim to be considered

Содержание DSmart300





















Отзывы: