DAYLIFF AQUASTRONG SMART 45, Инструкция по установке и эксплуатации

Страница: 13 / 16

11
PROBLEM POSSIBLE CAUSE SOLUTION
Flow rate
insufficient
Readjust to allowable delivery height Delivery height too big
Use pressure line with larger
Pressure line diameter too small
Clean suction opening Suction opening is blocked
Straighten pressure line Pressure line is kinked
Pressure line leaks
Pump runs very
loudly
Ensure there is sufficient water at
suction
Pump drawing in air
With correct installation and operation, Smart 45 does not need regular
maintenance.
During periods of inactivity, the pump must be disconnected from the power
supply and placed in a dry location.
Proceed as follows;
1. Switch off the pump using on/off button.
2. Disconnect from the power supply.
3. Open a tap to release pressure in the pipe system.
4. Close the isolating valves and drain the pipes.
5. Gradually loosen the priming plug to release the pressure in the pump.
6. Remove the drain plug to drain the pump.
6. MAINTENANCE AND STORAGE
diameter
Seal pressure line and tighten
threaded connections