Operation and Powering up
Your new Ampino is ready for operation after all the cables have been installed.
The Ampino is provided with functional and simple front panel control with very logical
and intuitive layout.
Ampino mono power amplifier should be the last powered ON device and also the first to
be powered OFF.
DO NOT unplug interconnect or loudspeaker cables while the power remains ON.
Never remove/insert AC line cord when the unit is ON.
Unplug the power cord of this product from the wall outlet during lightening storms or if
you are not going to use it for a long period of time.
Front Panel Features
Power switch: Two position toggle switch.
Upper position: ON.
Lower position: OFF.
Down center green LED: Indicates that the device is powered ON.
Rear Panel Features
Speaker terminals: for connection of your speaker cables.
Input terminal: for connecting your interconnect cable.
IEC Power connector: for connecting power cord.
