I. INSERT BATTERIES
NOTE:
Before every battery change, turn off the timer's water supply at your
outdoor faucet and then remove the timer from the faucet.
TIP:
Clean metal contacts with a clean cloth when replacing batteries.
1.Remove battery cover on the back of the timer.
2.Insert 2-
“
AA
”
batteries according to the instruction on the batteries location.
3.When put the batteries to the timer, pls ensure that the black cloth belt under the
batteries, it will be easy for you to take off the batteries.
II. SET TIME
1.Using button
“
+
”
and
“
-
”
to adjust current time. When pressing the button
continuously, the time will forward or backward by 10minutes/per time. Press
both the button
“
+
”
and
“
-
”
at the same time for more than 3 seconds, you
can change the time between 12 hours system and 24 hours system.
2
‘
RUN TIME
’
stands for different watering time settings. Altogether there are
sixteen settings as: 1, 3, 5, 7, 10, 15, 20, 25, 30, 45, 60, 75, 90, 120, 150,
180minutes. When you press Button
‘
RUN TIME
’
, the above sixteen modes
will display as: 00:01---03:00.
III. Twist Button Specification: Turn the Button to the Position You Desired
.
Altogether, there are twelve modes' options. If the valve is on or some other
program are working, then when turn the button to a new position (this new
position doesn't cycle at the moment), the valve will be off automatically and
ready for the new position.
Twelve options are as below:
OPERATING INSTRUCTIONS
4
3
2
1
1.OFF
2.ON: The valve is turn on and you get
sixteen different watering time for your
choice, this is applied to the below
option as well.
3.The valve will turn on automatically
every day at 6:00 AM
4.The valve will turn on automatically
every day at 6:00 PM
3
2