24
Setting the daily alarms
In clock mode, press the ALARM button
once. The LCD display will display the alarm
icon (11).
Press and hold the ALARM button for 2
seconds until the Alarm Time � ashing icon
is displayed. Now use the UP and DOWN
buttons to select the alarm time you require
and brie� y press the ALARM button to set
this Alarm time.
The Hour display of the Alarm time starts to
� ash. Use the UP and DOWN buttons to set
the required hour. Press the ALARM button
to con� rm your setting.
The Minute display of the Alarm time starts
to � ash. Use the UP and DOWN buttons to
set the required minute. Press the ALARM
button to con� rm your setting and to end
the setting procedure.
To activate or deactivate the daily alarms,
brie� y press the ALARM button once.
Note
After 7 seconds without pressing any
button the clock switches automatically
from Set Mode to Normal Clock Mode.
The alarm will sound for 1 minute if you do
not deactivate it by pressing any button.
The alarm will then repeat automatically
after 24 hours.
Rising alarm sound (crescendo, duration: 1
minute). The volume changes 4 times whilst
the alarm signal is heard.
Automatic snooze function
To activate the automatic snooze function:
While the alarm is sounding, press the
SNOOZE/LIGHT button to activate the
snooze function. When the snooze function
is activated, the snooze icon (12) appears in
the display.
This operation moves the alarm back by 5
minutes. The alarm will restart at this time.
°C/°F temperature display
The temperature is displayed in either °C
or °F. Brie� y pressing the DOWN button
allows you to switch between the individual
modes.
Connection to transmitter
Insert the 2 batteries into the transmitter.
Pay attention to the correct polarity. One
sensor is supplied with your receiver.
Press and hold the DOWN button for 2
seconds to search for outdoor sensors (to
erase the current data inside the RC clock).
