DE
Introduction
To get the most out of your new insect trap,
please read these instructions before use.
Please also save the instructions in case you
need to refer to them at a later date.
Technical data
Voltage/frequency:
220-240 V~ 50 Hz
Light source:
6 × UV-A LEDs
The appliance is double-insulated and
therefore does not require an earthed
connection.
Special safety instructions
This appliance must not be used by persons,
including children, with a physical, sensory
or mental disability or anyone without
experience or knowledge unless they are
supervised or have been instructed how to
use the appliance.
Children must not play with the appliance.
Do not insert foreign objects into the insect
trap when it is on.
Always keep the insect trap out of the reach
of children.
The insect trap is exclusively intended for
indoor use.
The insect trap must not be used in barns,
stables or similar locations.
The insect trap must not be covered or
placed on a soft surface, such as quilts,
pillows and the like. When hanging or
positioning the insect trap, ensure there is a
free � ow of air around it.
The light source cannot be replaced. Once
the light source stops working, the insect
trap must be thrown away.
INSECT TRAP
Main components
1. Hanging eyelet
2. Top with built-in fan
3. Light source
4. Grille
5. Collector
Use
The insect trap should be placed in a dark
place 50-100 cm above the � oor.
Plug the appliance in. Turn the socket on to
turn the insect trap on.
The insect trap’s blue light attracts � ying
insects. The built-in fan in the top of the
insect trap forces the insects down through
the grille and into the collector, which they
cannot get out of.
The insects die of dehydration.
1
2
3
4
5
1
