DAXYS LIZARD, Руководство пользователя

Страница: 14 / 28

12
1. Loosen screws A and B.
*To confirm that the fork is in the right position, check if the brake pads are
on the same side of the bike. 2. Rotate the handlebar riser 180° until it’s perfectly perpendicular
to the bike axis and loosen the height adjust bolt.
3. Adjust the height, tighten the bolt and loosen the stem cap bolts (A, B). 4. Remove the 2 stem bolts, then the stem cover and rubber washer.
5. Place handlebar in stem and screw the bolts in.
* It is recommended to angle the brake handles at aprox. 45°
6. Adjust handlebar and display to the desired angle and tighten
the 2 bolts.
2. HANDLEBAR INSTALLATION