DAXOM UKDAX-80Y10BT, Руководство по установке

Страница: 3 / 55

3

After you unpack the device, be sure that content is in good position and complete
otherwise contact with the sales agency that you have purchased the device.

Safety valve outlet must be connected to suitable discharge system. All
responsibilities are belong to user in case of any damage that occurs because of
any intervention to safety valve.

Remove all packing wastes carefully without giving damage to human and
environment health.

In case of water leakage happens, water feed must be close and authorized
service agency must be immediately informed.

Hydraulic system operation pressure must be between 1 and 2 bars therefore it
must not exceed 3 bars. In case of need reduce water pressure of heater circuit
from discharge valve of installment.

If the device will not have used for a long time, perform following points are
suggested.

Bring switch of the device OFF position.

Close taps both heating and hot water network.

Discharge heating installation and boiler cycle for preventing freezing.

Device should not be used by children, people with insufficient physical, sensory
or mental capabilities or people who are lack experience and knowledge about the
usage of the device.

In case of having smoked or burning smell originating from device, make switch of
the device”OFF” position and contact with authorized service agency.

Do not touch the device with wet hand or when outside of device is wet.

Do not use substances such as detergent and thinner for the cleaning of the
device. Clean outside of the device with damp
–dry fabric after make switch of
device OFF.

Absolutely control temperature of hot water before using.

The lifetime of the device which is determined by Ministry of Custom and trade is
10 years