DAXOM UKDAX-18GT, Инструкция по установке и эксплуатации, Страница: 19 / 20

8. TROUBLE AND SOLUTIONS
Problem Cause Of Problem Solution Way
Leakage at water
inlet and outlet
connections 1. Connections do not tighten good 1.Tighten the connections
2. Sealing Gasket have damaged 2. Change the sealing gasket
Cold water flow
from outlet
1. Power off before water heater not
get to work on
1. Control and open the power.
2. Water Flow is weak and not
started to operate correctly.
2. Increase the water flow
3. Switch of the water heater is
“OFF” position.
3. Turn on the switch
4. Heating Element Problem 4. Call Authorised service
Low Temperature 1. Setting temperature is too low.
1. Increase the temperature or
less the water
Higher
Temperature
2. Setting Temperature is too high. 2. Decrease the temperature.
Power Light not
light up
1. Power Off 1. Turn On the power
2. Thermostad Protection 2. Call the authorized service
3. Trouble of Water Heater 3. Call the authorized service
Water Flow is not
enough 1.Water Heater Filter is blocked 1.Clean the filter
2. Pipes are blocked 2. Make control of your pipes.
E1 Error
Water Outlet Temperature Sensor
Problem
Call Authorized Service
E2 Error Electrical Problem
E3 Error
Inlet Water Temperature Sensor
Problem
E6 Error Grounding Cable Problem
E0 Error Electric Leakage Call Authorized Service