DAXOM Thermotank UKDAX-160GB25, Инструкция по установке и эксплуатации

Страница: 5 / 29

5

The waste gas pipe should not be installed in the general chimney or ventilation
space of the building. The waste gas pipe should definitely go outside the building.
Pipe exit should not be from passages and corridors, narrow eaves, ventilation
and light spaces of buildings, balconies (open or closed), elevator shafts and
protruding building parts that prevent waste gas outlet, openings that provide
fresh air to other units, and places that may be exposed to direct wind resistance.
The open end of the air intake pipe should be at least 100 mm from the wall where
it is installed

Waste gas pipe must install to upward curved as making 3 degree horizantal
angle

Squall to waste gas pipe may cause product out of function

The environment where the water heater is mounted should be free from blocking,
preventing parts and projections during the repair and maintenance; there should
be sufficient space around the device for repair and maintenance.

Definitely, flammable and explosive substances must not be at the same place
with product.

The waste gas pipe can be extended when necessary however the total pipe
length must not be excess pipe length measurement determined inside mannual.

The hole opened for the waste gas pipe in the wall after the installing, should be
filled with a substance resistant to burning and it should be isolated.

Electric connection of the heater must be grounded and must have suitable value
fuse determined inside mannual.

The wall, which product is installed, should be strong as to carry the weight of
the product.
Make sure that ,the floor , which product will be installed, should be strong as to
carry the weight of the product.
4. PRODUCT INSTALLATION
4.1 Installation Conditions and Safety Warnings
4.2. Place The Product