DAXOM Naviels, Руководство пользователя и инструкция по установке, Страница: 3 / 45

3
▪
The safety valve outlet must be connected to an appropriate discharge
system. All liability for damages that may occur due to any intervention to
the safety valve belongs to the user.
▪
Dispose of all packaging refuse carefully, without harming the environment
or human health.
▪
In case of water leakage, the water supply should be turned off and the
Installer should be informed immediately.
▪
Heating circuit water pressure should be between 1 and 2 bar and should
never exceed 3 bar pressure. If necessary, reduce the heating circuit water
pressure from the discharge valve in your installation.
▪
If the device will be out of use for a prolonged time, it is recommended
to perform the following actions:
▪
Turn off the electrical switch of the device.
▪
Close the water valves in both the heating and DHW installation.
▪
Discharge the heating circuit water to prevent freezing.
▪
The device must not be used by children or unattended disabled
persons.
▪
In case of smoke or burning smell caused by the device, turn off the
electrical switch of the device and contact the Installer.
▪
Do not touch the device with wet hands or when the outside of the device is
wet.
▪
Do not use chemicals such as detergents or thinners for cleaning the
device. Do the external cleaning of the device using a slightly damp cloth
but after turning off the electrical switch of the device.
▪
Before using the hot water, be sure to check its temperature.
▪
Adjust the indoor temperature according to your needs.
▪
Homogeneous heating provision in the areas of the heating environment
in accordance with the purpose of use increases savings.
2. SUGGESTIONS FOR ECONOMICAL USE