DAXOM Naviels UKDAX-10EDT, Инструкция по установке и эксплуатации, Страница: 45 / 47

45
9. TROUBLE SHOOTING
Arıza Kodu Arıza Çözüm
E0

Water pressure is not
enough

Set the water pressure between 1 and 2
bars

Water pressure switch
damage

Call authorized service

Although you wait for a while if you still have
seen the same code, call the authorized
service.
E1

Heating sensor damage
E3

Warning of water
temperature is over 85
o
C

Device will start to operate a few min later.

Sıcaklık 85
o
C’ nin altına düştüğünde

Warning of limit thermostad
is in circuit
çalışmaya başlayacaktır When the
temperature is below 85 degree, it is going
to start to operate
E4 
Although you wait for a while if you still have
seen the same code, call the authorized
service.

Pipe is blocked or valve is
closed

Control if tis closed valve or not at heating
installation and clean silt trap.
E5

Pump damage

Flowmeter damage

Call the authorized service.