ww w. daxib.c
om
INSTALLATION GUIDE
BSN-CL12243
01
03
Thoroughly clean the floor area where the toilet will be
installed. Align the flange ring at the pit pipe and mark
the place where the bolts should be fixed, take it away,
drill the holes at the marks with a suitable bit and fix
the expansion pipe. Screw the ange ring and fix the
whole ange ring on the floor with the bolts.
Unplug the waste opening. Gently place the toilet
right side up in position with the toilet mounting bolts
going through the holes in the porcelain base. Press
down on the toilet until it is leveled, if necessary use
wedges to make it leveled.
The toilet should be placed on the floor upside
down, on a soft piece of cloth to prevent
scratching. Place the wax ring in the circular
recess in the base of the bowl.
Connect the water inlet to the tank. Make sure
water pressure is suffcient to fll the tank.
Check the replenishing pipe and see if the
water overfow pipe is inserted. Warning: if the
overfow pipe is not inserted, the fushing may
be affected.
Slowly open the water inlet and check the
water tightness of each connection joint.
Install the toilet seat in accordance with the
instructions.
Apply a mould-proof silicon between the foor
and the toilet base.
02
04
05
06
07
08
Содержание BSN-CL12243
Страница 1: ...BSN CL12243 TOILETS SERIES...